The Corrugated Roof Anchor is a versatile, reusable solution designed for secure attachment on corrugated metal roofs. With a 360° rotating swivel D-ring, it provides maximum mobility while ensuring reliable fall protection. Engineered for compatibility with most corrugated roofs, it allows you to use your own fasteners to suit the specific roof type while maintaining waterproofing. Designed to reinstall fasteners after detachment, preventing leaks and preserving the roof’s integrity.
Corrugated Roof Anchor: Stainless Steel
024-4113
Corrugated Roof Anchor: Stainless Steel
024-4113Roofing
The Corrugated Roof Anchor is a versatile, reusable solution designed for secure attachment on corrugated metal roofs. With a 360° rotating swivel D-ring, it provides maximum mobility while ensuring reliable fall protection. Engineered for compatibility with most corrugated roofs, it allows you to use your own fasteners to suit the specific roof type while maintaining waterproofing. Designed to reinstall fasteners after detachment, preventing leaks and preserving the roof’s integrity.
Features:
-
Designed for use on corrugated roofs with maximum ridge height of 1-3/4” and width of 3-3/4”
- 360⁰ rotating swivel D-ring
- Allows use of your own fasteners to ensure compatibility with your specific roof type. Designed for easy removal - simply reinstall the fasteners after detaching the anchor to maintain the roof’s integrity and prevent leaks.
- Minimum valley spacing of 8” between ridges
- Temporary and reusable
- Not suitable for Horizontal Lifeline (HLL) or material hauling use.
Related products
-
Knock-Down Roof Anchor
This product has multiple variants. The options may be chosen on the product page -
021-4066
-
019-4005
Specifications
| Materials: | Stainless steel |
| Weight: | 5.8 lbs. (2.6 kg) |
| Dimensions: | 20.1" x 4" x 2.9" (510 mm x 101.5 mm x 74 mm) |
| Minimum Breaking Strength: | 5,000 lbs. (22 kN) |
| ANSI Weight Capacity: | 130-310 lbs. (59-141 kg) |
| OSHA Weight Capacity: | OSHA Weight Capacity: Up to 420 lbs. (191 kg)) |
| OSHA Standards: | 1926.502, 1910.140, 1910.66 |
| Fastener Requirements: | Requires (6) #12 or #14 metal-to-metal self-drill HWH screws with integrated EPDM washers. Length of screw is dependent on the roof gauge and purlin thickness with an anchor depth of 1/8”. Minimum embedment of 1/4” into purlin is required. |
Related Products
Related products
-
021-4042
-
021-4065
